03用于表壳，玻璃，表圈以及表带的工具
-
Black Hunting Hunting, 1 Gray PVC tip, Ø 1.50 mm and 1 Red PVC tip, Ø 0.80 mm, in package of 100 pieces
7404-2-100
Recommanded for quartz watches. Length: 115 mm. Ø: 6 mm. 1 tool with grey handle including :- 1 end piece in white PVC with a hole of Ø 0.50 mm.- 1 ...
-
Red Hunting Hunt, 1 Brass Flat Employment and 1 Flat Flat tip in blue PVC, pack of 100 pieces
7404-3-100
Recommanded for quartz watches. Length: 115 mm. Ø: 6 mm. 1 tool with grey handle including :- 1 end piece in white PVC with a hole of Ø 0.50 mm.- 1 ...
-
-
Pliers to open and tighten the rings
4848
For opening and tightening all rings.
In aluminium casting.
Fine quality. Length 160 mm. -
Set of 13 Reversible Stake with Straight Edges synthetic for press tool
5500-J-N
Reversible stakes. Ø : 48 x 46, 44 x 42, 40 x 38, 35 x 34, 33 x 32, 31 x 30, 29 x 28, 27 x 26, 25 x 24, 23 x 22, 21 x 20, 19 x 18, 17 x 15.-J: In ...
-
-
-
Pins to drive out in steel for press tool, Ø 0.80 mm, length 27 mm
7250-GC-0010 DI 0.80
Replacement pin, short. Ø 0.80 mm. Lenght 27 mm.
For: Horizontal device to drive in and out pins, 7250.
-
Pins to drive out in steel for press tool, short - Total length: 27 mm / Usable length: 6 mm / Ø 1.00 mm
7250-GC-0010 DI 1.00
Replacement pin, short. Ø 1.00 mm. Lenght 27 mm.
For: Horizontal device to drive in and out pins, 7250.
-
ENA CIER, LONG, Ø 0.80 mm, length 33 mm
7250-GL-0010 DI 0.80
Replacement pin, long. Ø 0.80 mm. Lenght 33 mm.
For: Horizontal device to drive in and out pins, 7250.
- 分类
-
- POMPE POUR ENLEVER LES VERRES (0)
- 刀 "MINATHOR" 日常系列/ 起针器 (1)
- 唧筒 供拆除胶镜用 (6)
- 开底器 。 配用于JAXA夹头 (7)
- 手表玻璃工具 (7)
- 按压机 "RAWYLER" 开/关防水表机 (3)
- 表壳工具 (357)
- 表带工具 (227)
- 装/拆表针工具 (156)
- 起针钳 (5)
