07Devices for opening/closing, staking tools, lathes, motors, vices/holders/pin vices, riveting stakes
-
Docure pliers, hollow, body Ø 8 mm, tightening Ø 6.0 - 22 mm
1766-23 DI 6.0
Concave. Shank diam. 8 mm. To hold barrels, wheels, etc., from 5.6 to 23.2 mm in diam. Indicate the bore
-
Docure pliers, hollow, body Ø 8 mm, tightening Ø 6.4 - 22.4 mm
1766-23 DI 6.4
Concave. Shank diam. 8 mm. To hold barrels, wheels, etc., from 5.6 to 23.2 mm in diam. Indicate the bore
-
Scale pliers, in cone, body Ø 8 mm, tightening Ø 4.8 - 22.8 mm
1766-24 DI 4.8
Conical. To hold workpieces from diam. 4.8-23.2 mm. Shank diam. 8mm
-
Scale pliers, in cone, body Ø 8 mm, tightening Ø 5.2 - 23.2 mm
1766-24 DI 5.2
Conical. To hold workpieces from diam. 4.8-23.2 mm. Shank diam. 8mm
-
Scale pliers, in cone, body Ø 8 mm, tightening Ø 5.6 - 21.6 mm
1766-24 DI 5.6
Conical. To hold workpieces from diam. 4.8-23.2 mm. Shank diam. 8mm
-
Scale pliers, in cone, body Ø 8 mm, tightening Ø 6.0 - 22 mm
1766-24 DI 6.0
Conical. To hold workpieces from diam. 4.8-23.2 mm. Shank diam. 8mm
-
Scale pliers, in cone, body Ø 8 mm, tightening Ø 6.4 - 22.4 mm
1766-24 DI 6.4
Conical. To hold workpieces from diam. 4.8-23.2 mm. Shank diam. 8mm
-
-
Steel Jacob type mandrel for tower
1766-28
Shank diameter 8 mm. Capacity 0 to 4 mm. This type of chuck cannot be substituted for a split chuck, for it is less precise, but it is most useful for...
-
Dia 1 mm steel Dia door spindle for tower
1766-31-D
For fitting to the tailstock, with:A) 1 centring plate, with tapered holes from 0.15 - 1.40 mm and 8 points from 0.15 - 0.50 mm.B) 1 double centring ...
- Category
-
- "Multi-broches" press (0)
- Bergeon staking tool with base (179)
- Device for opening/closing (788)
- Lathe (165)
- Motor (59)
- Riveting stake (21)
- Seitz jewel assortment (349)
- Seitz simple pusher (140)
- Staking tool (0)
- Staking tool star (0)
- Vice/holder/pin vice (62)
