07Devices for opening/closing, staking tools, lathes, motors, vices/holders/pin vices, riveting stakes
-
Holes, steel, 46 x 46 x 15 mm
1907
Avec 4 fentes et 15 trous de Ø 2.00 à 8.60 mm
15 holes Ø 0.80 - 6.30 mm. 4 slots. Size: 46 x 46 x 15 mm.
-
Steel anvil, 40 x 40 x 40 mm, 52 Ø 0.30 to 10 mm holes
5079
Sizes: 40 x 40 x 40 mm. Holes: 0.029 to 10 mm.
In steel. -
Tool in steel to removing the broken screws, with 2 pins for watchmaker's
30209
With 2 driving pins No 30209-C.
-
-
-
SEITZ by Bergeon Jewelling tool, complete set of tools, in case
31300
Roller lever to reduce frictional forces<br>Micrometric adjustment to 0.01 mm of the driving height.<br><br>Anodized aluminum frame ...
-
SEITZ by Bergeon Jewelling tool
31300-P
1. Roller lever to reduce frictional forces<br>2. Micrometric adjustment to 0.01 mm of the driving height.<br><br>• Anodized ...
-
STAR Staking tool and friction jewelling outfit, with 120 punches and 24 stakes, with base, in a case
15285-93C
Machined cast alloy.<br>Guiding canon ∅ 4.7 mm.<br>Knurled nut enables adjustment of shake.<br>All punches and stakes are fitted ...
-
-
Staking tool, with 50 punches and 10 stakes, without base, in a case
15285-B
Die-cast alloy, matt chromed.<br>Guiding canon ∅ 4.7 mm.<br>All punches and stakes are fitted in the case, each punch is numbered. A ...
- Category
-
- "Multi-broches" press (0)
- Bergeon staking tool with base (179)
- Device for opening/closing (788)
- Lathe (165)
- Motor (59)
- Riveting stake (21)
- Seitz jewel assortment (349)
- Seitz simple pusher (140)
- Staking tool (0)
- Staking tool star (0)
- Vice/holder/pin vice (62)
