拧紧工具
-
Bench-vice
15473
Cast iron frame<br>Smooth parallel jaws in hardened and ground steel<br>Opening: 0 - 50 mm
-
Assortment of 6 holders for balance screws, length 100 mm, in steel, cardboard box
2565-AC6
Contents: Ø 0.25, 0.30, 0.40, 0.50, 0.60, 0.70 mm
-
-
Pin vice with 2 chucks
5678
With 2 chucks. Opening: 0 - 1.3 / 1.7 - 3 mm.<br>Handle in nickel plated brass. <br>Length: 115 mm.<br>Hexagonal heads.
-
Set of 4 round head mandrels, with 2 nickel -plated brass pliers
1842-A
Round head.
Handle in nickel plated brass. 2 chucks with square adjustment. -
Set of 4 square head mandrels, with 2 nickel -plated brass pliers
1842-B
Square head.
Handle in nickel plated brass. 2 chucks with square adjustment. -
Bench-removable vice in iron for watchmakers: 0 - 30 mm, width: 45 mm
2021
Yellowish grey varnish, furnace annealed. Only the fixing plate is permanently screwed on the bench. The vice can be set up or removed in a few ...
-
-
Holders in steel for balance screws, Ø of the hole 0.30 mm, length 100 mm
2567 DI 0.30
Length: 100 mm. When ordering: indicate the Ø.Hole Ø: 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - 0.60 - 0.65 - 0.70 - 0.80 - 0.90 - 1....
-
Holders in steel for balance screws, Ø of the hole 0.40 mm, length 100 mm
2567 DI 0.40
Length: 100 mm. When ordering: indicate the Ø.Hole Ø: 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - 0.60 - 0.65 - 0.70 - 0.80 - 0.90 - 1....
- 分类
-
- 梢针钳 发条轴鼓夹具 (11)
- 梢钉夹钳 (26)
- 梢钉夹钳 夹钳 (12)
- 用于老虎钳的黄杨木楔子 (13)
- 螺丝修磨器 螺丝修磨器 (0)
