1766-24 DI 6.0
Conical. To hold workpieces from diam. 4.8-23.2 mm. Shank diam. 8mm
1766-24 DI 6.4
Conical. To hold workpieces from diam. 4.8-23.2 mm. Shank diam. 8mm
1766-24A
5 serrages: Ø 4.8 - 22.8 mm, Ø 5.2 - 23.2 mm, Ø 5.6 - 21.6 mm, Ø 6.2 - 22 mm et Ø 6.4 - 22.4 mm
Conical. To hold workpieces from diam. 4.8-23.2 mm. Shank diam. 8mm
1766-24S
5 serrages: Ø 4.8 - 22.8 mm, Ø 5.2 - 23.2 mm, Ø 5.6 - 21.6 mm, Ø 6.2 - 22 mm et Ø 6.4 - 22.4 mm
5 ring step-chucks. Shank
?
8 mm.
?
5 - 23 mm.
See No 1766-24 page No 5040 M.
1766-28
Shank diameter 8 mm. Capacity 0 to 4 mm. This type of chuck cannot be substituted for a split chuck, for it is less precise, but it is most useful for...
1766-28S
1 x box chuch with 8 screws 1766-25<br>1 x grinding-wheel driver 1766-26<br>1 x Jacob's chuck 1766-28
1766-30S
Contenu: 1 tasseau entraîneur réf. 1766-30, 1 disque à 10 trous réf. 1766-32 et 6 tasseaux à gommer réf. 1766-29
1 carrier chuck No 1766-30. 1 centring plate with 10 holes No 1766-32. 6 wax chucks No 1766-29. See pages No 5040 O-P.
1766-31
For fitting to the tailstock, with:A) 1 centring plate, with tapered holes from 0.15 - 1.40 mm and 8 points from 0.15 - 0.50 mm.B) 1 double centring ...
1766-31-C
For fitting to the tailstock, with:A) 1 centring plate, with tapered holes from 0.15 - 1.40 mm and 8 points from 0.15 - 0.50 mm.B) 1 double centring ...