1766-31-A
For fitting to the tailstock, with:A) 1 centring plate, with tapered holes from 0.15 - 1.40 mm and 8 points from 0.15 - 0.50 mm.B) 1 double centring ...
1766-32
Diam. 1-3 mm of medium and large diameters, for clockmaking. Fitted to the universal runner, for special work
1766-33
0.35 to 1.40 mm, for burnishing pivots of large clocks and instruments. For fitting to the universal runner.
1766-33S
Contenu: 1 disque à encoches réf. 1766-33, 2 porte-tasseaux réf. 1766-36 et 1 broche universelle réf. 1766-31
1 drum with grooves No 1766-33. 2 stake-holders No 1766-36. 1 universal runner No 1766-31. See page No 5040 Q-R.
1766-34
With slide, for fitting to the fixed tailstock, with 1 12 mm Ø pulley, 16 mm Ø pulley and 10 small stakes, 1 key.This runner can be fitted in any ...
1766-34A
Similar to No 34, but for fitting to the headstock No 1, instead of a split chuck. It is necessary to lock the headstock by the index.
1766-34AS
1 combined runner No 1766-34A. See page No 5040 R
1766-35S
Contenu: 1 proche porte-tasseaux réf. 1766-35 et 10 tasseaux
1 stake holder runner with 10 stakes No 1766-35. See page No 5040 R
1766-36
1 centred, 1 eccentric for fitting to runner No 35 to take the small stakes used with runner No 34.